Featured Symantec certification ST0-237 exam test questions and answers

If you have decided to participate in the Symantec ST0-237 exam, Pass4Test is here. We can help you achieve your goals. We know that you need to pass your Symantec ST0-237 exam, we promise that provide high quality exam materials for you, Which can help you through Symantec ST0-237 exam.

Symantec ST0-237 certification exam is one of the most valuable certification exams. IT industry is under rapid development in the new century, the demands for IT talents are increased year by year. Therefore, a lots of people want to become the darling of the workplace by IT certification. How to get you through the Symantec ST0-237 certification? The questions and the answers Pass4Test Symantec provides are your best choice. It is difficult to pass the test and the proper shortcut is necessary. Symantec Business Solutions Pass4Test ST0-237 Dumps rewritten by high rated top IT experts to the ultimate level of technical accuracy. The version is the most latest and it has a high quality products.

Education degree does not equal strength, and it does not mean ability. Education degree just mean that you have this learning experience only. And the real ability is exercised in practice, it is not necessarily linked with the academic qualifications. Do not feel that you have no ability, and don't doubt yourself. When you choose to participate in the Symantec ST0-237 exam, it is necessary to pass it. If you are concerned about the test, however, you can choose Pass4Test's Symantec ST0-237 exam training materials. No matter how low your qualifications, you can easily understand the content of the training materials. And you can pass the exam successfully.

Exam Code: ST0-237
Exam Name: Symantec (Symantec Data Loss Prevention 12 Technical Assessment)
One year free update, No help, Full refund!
Total Q&A: 300 Questions and Answers
Last Update: 2014-01-28

According to the research of the past exams and answers, Pass4Test provide you the latest Symantec ST0-237 exercises and answers, which have have a very close similarity with real exam. Pass4Test can promise that you can 100% pass your first time to attend Symantec certification ST0-237 exam.

Pass4Test is a professional website. It gives every candidate to provide quality services, including pre-sale service and after-sale service. If you need our products, you can be trying to use Pass4Test Symantec ST0-237 free demo. Any place can be easy to learn with pdf real questions and answers! If it is ok, we look forward to your further contacts. If you unfortunately fail, we will refund all fees. And we will provide free updates for a year until you pass Symantec ST0-237 certification.

Having a Symantec certification ST0-237 exam certificate can help people who are looking for a job get better employment opportunities in the IT field and will also pave the way for a successful IT career for them.

Pass4Test is a website to meet the needs of many customers. Some people who used our simulation test software to pass the IT certification exam to become a Pass4Test repeat customers. Pass4Test can provide the leading Symantec training techniques to help you pass Symantec certification ST0-237 exam.

ST0-237 Free Demo Download: http://www.pass4test.com/ST0-237.html

NO.1 What is the minimum percentage of spare disks in a disk group?
A. 10%
B. 15%
C. 20%
D. 25%
Answer: A

Symantec pdf   ST0-237 original questions   ST0-237 demo   ST0-237 demo   ST0-237 braindump

NO.2 Which two locations can the administrator verify a newly created policy was loaded on a
detection server? (Select two.)
A. System > Servers > Overview
B. System > Servers > Server Detail
C. Manage > Policies > Policy List
D. System > Servers > Overview > Configure Server
E. System > Servers > Events
Answer: B,E

Symantec test questions   ST0-237   ST0-237

NO.3 A DLP administrator needs to forward data loss incidents to the company's Security
Information and Event Management (SIEM) system.Which response rule action provides the
administrator with the ability to accomplish this task?
A. All: Send Email Notification
B. All: Log to a Syslog Server
C. All: Add Note
D. All: Set Attribute
Answer: B

Symantec questions   ST0-237   ST0-237 study guide   ST0-237 exam dumps

NO.4 After installing Veritas Enterprise Administrator, you start the VEA with the profile name that
you have specified.When you click the Console View, what does it display? (Select two.)
A. Active Events
B. Volume Summary
C. Alerts
D. Disk History
Answer: A,C

Symantec   ST0-237   ST0-237   ST0-237   ST0-237 answers real questions

NO.5 You are managing a Storage Foundation 5.0 server that has Storage Foundation Management
Server (SFMS) software installed. You force a placement policy to a file system using the Storage
Foundation Management Server (SFMS).
What is the outcome when a policy is forced to a file system?
A. The current policies of the file system are overwritten by the SFMS policies.
B. The file system will retain its policies and discard the SFMS policies.
C. The file system will incorporate the changes of both the policies.
D. The file system will apply the SFMS policies only in the case where its own policies cannot be
assigned.
Answer: A

Symantec   ST0-237 exam prep   ST0-237 pdf   ST0-237   ST0-237 exam simulations

NO.6 In System Overview, the status of a detection server is shown as 'unknown'. Examination of
the detection server reveals all Vontu services are running.
Which port is blocked and causing the server to be in the 'unknown' state?
A. 443
B. 8000
C. 8100
D. 8300
Answer: C

Symantec   ST0-237 demo   ST0-237

NO.7 Which is a limitation of using CDS disk layout under VxVM 4.0 or above?
A. The CDS format cannot contain a private region and a public region on a single partition.
B. The CDS format cannot be used with hardware RAID controllers.
C. The CDS format cannot be used in conjunction with OS-level partitioning.
D. The CDS format cannot be used for boot disks.
Answer: D

Symantec   ST0-237   ST0-237 certification   ST0-237   ST0-237 dumps

NO.8 Which rule will you use to discover disabled controllers failures in the Storage Foundation
5.0 environment?
A. vxse_host
B. vxse_disk
C. vxse_disklog
D. vxse_dc_failures
Answer: D

Symantec   ST0-237   ST0-237

NO.9 You need to create a volume for the HR department. You need to mount a file system with a
high demand for I/O throughput. You are aware that spanning the volume across multiple disks will
increase the I/O performance.Which risk should you be aware of when spanning the volume across
multiple disks?
A. Write throughput degradation
B. Single disk failure causes volume failure
C. Requirement for disk redundancy
D. Poor I/O performance
Answer: B

Symantec pdf   ST0-237   ST0-237 dumps torrent

NO.10 An incorrectable I/O error has occurred on a RAID volume due to a disk failure that caused
the data on the disk to become unavailable. For the RAID volume, the subdisk becomes unavailable
and is considered stale and detached.What is the RAID level in the volume in this situation?
A. 0
B. 2
C. 4
D. 5
Answer: D

Symantec   ST0-237   ST0-237

NO.11 An information security officer has detected an unauthorized tool on desktops being used to
transmit data with encrypted communications.
Which Symantec Data Loss Prevention feature should the information security officer use to prevent
this tool from accessing confidential data?
A. removable storage monitoring
B. network protocol monitoring
C. application path filtering
D. application monitoring
Answer: D

Symantec exam prep   ST0-237   ST0-237 original questions   ST0-237

NO.12 Which valid automated response option should an administrator choose for Email Prevent?
A. modify the message subject or add specific RFC-2822 headers
B. add metadata to email headers of confidential email
C. modify the body of email messages containing confidential data
D. process confidential email re-routed to a specified email list
Answer: A

Symantec exam simulations   ST0-237   ST0-237 test answers

NO.13 A system administrator has a large amount of data that is not being accessed on the
company's storage devices. This excess amount of data is causing slow access to the active data. You
want to set up automatic relocation of data so that data expires as per its defined age.
What should you do?
A. Use the Data Movement Service (DMS) to set the threshold for automatic relocation of data.
B. Use the Quality of Storage Service (QoSS) to set the threshold for automatic relocation of data.
C. Use the Virtual Data Aging Service (VDAS) to set the threshold automatic relocation of data.
D. Use the Intelligent Volume Service (IVS) to set the threshold for automatic relocation of data.
Answer: B

Symantec dumps   ST0-237 test answers   ST0-237

NO.14 When you attempt to start the RAID-5 volume, you are prompted with an error message
"VxVM ERROR V-5-1-1237 Volume r5vol is not startable; some subdisks are unusable and the parity
is stale." You want to remove this error and start the RAID-5 volume.
How will you ensure that you do not encounter this error again?
A. Use a single RAID-5 log plex in RAID-5 volumes.
B. Change the subdisks.
C. Use two or more RAID-5 log plexes in RAID-5 volumes.
D. Reattach the subdisks.
Answer: C

Symantec practice test   ST0-237 pdf   ST0-237 certification training   ST0-237 test questions   ST0-237 test answers

NO.15 You need to create a new volume. The new volume will only use disks on controller 1. You
want to execute the vxassist command with the ctlr:c1 storage attribute. You want to ensure that
the command provides desired output.
What should you ensure to meet the required goal?
A. Ensure that storage attribute is a part of the disk group.
B. Ensure that storage attribute is a part of the plex.
C. Ensure that storage attribute is a part of the disk.
D. Ensure that storage attribute is a part of the volume.
Answer: A

Symantec test questions   ST0-237 test questions   ST0-237 test questions

NO.16 You have a system that has two disks-disk01 and disk02, which are mapped into the system
configuration during boot as disks c0t0d0s2 and c0t1d0s2, respectively. A failure has caused disk01
to become detached.What would you do to view the status of the failed disk01?
A. Use the vxdg list command
B. Use the vxdg -s list command
C. Use the vxprint command
D. Use the vxdisk list command
Answer: D

Symantec exam simulations   ST0-237 practice test   ST0-237   ST0-237   ST0-237   ST0-237 demo

NO.17 An incident responder is viewing a discover incident snapshot and needs to determine which
information to provide to the next level responder.Which information would be most useful in
assisting the next level responder with data clean-up?
A. Incident Details: Message Body content
B. Custom Attributes: Most Active User from Data Insight
C. Incident Details: File Owner metadata
D. Access Information: File Permissions
Answer: B

Symantec demo   ST0-237 braindump   ST0-237 exam   ST0-237   ST0-237

NO.18 You have a nonredundant concatenated volume named datavol in a disk group named datadg.
The volume has a file system on it. One of the underlying disks of the volume called datadg02 fails
temporarily due to a power failure. You fix the problem of the power failure, and ensure that the
disk is powered back again. You ensure that both the system and VxVM can see the disk again. Then,
you reattach the disk back to the disk media record.
Which command will you execute next to be able to run fsck on the file system?
A. vxvol -g datadg start datavol
B. vxrecover -s datavol
C. vxrecover -ns
D. vxvol -g datadg -f start datavol
Answer: D

Symantec   ST0-237   ST0-237 exam   ST0-237

Pass4Test offer the latest 74-324 exam material and high-quality LOT-404 pdf questions & answers. Our JN0-692 VCE testing engine and CV0-001 study guide can help you pass the real exam. High-quality C_TFIN22_64 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.pass4test.com/ST0-237.html