You have seen Pass4Test's SCO 090-077 exam training materials, it is time to make a choice. You can choose other products, but you have to know that Pass4Test can bring you infinite interests. Only Pass4Test can guarantee you 100% success. Pass4Test allows you to have a bright future. And allows you to work in the field of information technology with high efficiency.
Selecting the products of Pass4Test which provide the latest and the most accurate information about SCO 090-077, your success is not far away.
Our Pass4Test have a huge IT elite team. They will accurately and quickly provide you with SCO certification 090-077 exam materials and timely update SCO 090-077 exam certification exam practice questions and answers and binding. Besides, Pass4Test also got a high reputation in many certification industry. The the probability of passing SCO certification 090-077 exam is very small, but the reliability of Pass4Test can guarantee you to pass the examination of this probability.
Pass4Test have a huge senior IT expert team. They use their professional IT knowledge and rich experience to develop a wide range of different training plans which can help you pass SCO certification 090-077 exam successfully. In Pass4Test you can always find out the most suitable training way for you to pass the exam easily. No matter you choose which kind of the training method, Pass4Test will provide you a free one-year update service. Pass4Test's information resources are very wide and also very accurate. When selecting Pass4Test, passing SCO certification 090-077 exam is much more simple for you.
Exam Code: 090-077
Exam Name: SCO (UNIXWARE 7 ACE RECERTIFICATION V10A1)
One year free update, No help, Full refund!
Total Q&A: 58 Questions and Answers
Last Update: 2013-11-22
090-077 Free Demo Download: http://www.pass4test.com/090-077.html
NO.1 Which answer describes the correct order in which diskadd (1M) invokes commands to configure
additional disks?
A. fdisk (1M), mkfs (1M0, and disksetup (1M)
B. disksetup (1M), fdisk (1M), and mkfs (1M)
C. fdisk (1M), disksetup (1M), and mkfs (1M)
D. None of the above.
Answer: C
SCO 090-077 090-077 090-077
NO.2 In which file can you add or change default boot parameters?
A. /stand/bfs.blm
B. /stand/boot
C. /stand/smallfs.blm
D. /stand/stage3.blm
Answer: B
SCO braindump 090-077 090-077 090-077 exam dumps 090-077 test questions
NO.3 Which of the following actions occur when you choose se default disk operations?during the installation
of UnixWare 7?
A. A new boot sector installs, the disk is NOT scanned for bad blocks, and the disk geometry is NOT
configured.
B. A new boot sector installs, the disk is scanned for bad blocks, and the disk geometry is configured.
C. A new boot sector installs, the disk is scanned for bad blocks, and the disk geometry is NOT
configured.
D. A new boot sector installs, the disk is NOT scanned for bad blocks, and the disk geometry is
configured.
Answer: A
SCO test answers 090-077 090-077 original questions
NO.4 Every UnixWare 7 system with TCP/IP has a network routing table within the kernel. Which field is NOT
contained in a routing table entry?
A. Netmask
B. Broadcast Address
C. Destination IP address
D. Network interface
Answer: B
SCO 090-077 test 090-077 090-077
NO.5 How many partitions can you define on the first hard disk during the installation of the UnixWare 7
operating system?
A. One (1)
B. Two (2)
C. Three (3)
D. Four (4)
Answer: D
SCO questions 090-077 090-077 questions 090-077
NO.6 Which command line creates a character special device file with a major number=19 and a minor
number=1?
A. mknod /dev/devicename c 19 1
B. mknod /dev/devicename c 1 19
C. mkdev /dev/devicename c 19 1
D. mkdev /dev/devicename c 1 19
Answer: A
SCO 090-077 test questions 090-077
NO.7 Which statement is false?
A. The vxfs filesystem supports the creation of 2 terabyte file sizes by default.
B. The vxfs filesytem supports the creation of up to 2 gigabyte file sizes by default.
C. The vxfs filesystem supports a 4 kilobyte logical block size.
D. The vxfs filesystem supports an 8 kilobyte logical block size.
Answer: A
SCO exam prep 090-077 study guide 090-077 questions 090-077 dumps
NO.8 What is the maximum vxfs (VERITAS) filesystem size?
A. 2 terabytes
B. 1 terabyte
C. 2 gigabytes
D. 1 gigabyte
Answer: B
SCO 090-077 exam dumps 090-077 090-077 exam dumps 090-077
NO.9 If it exists, in which hard disk slice is the PDINFO (Physical Disk Information) stored?
A. The boot slice
B. The dump slice
C. The var slice
D. The volume management public slice
Answer: C
SCO 090-077 test answers 090-077 090-077 test answers 090-077
NO.10 Which command can you use to display the attributes of any disk device?
A. devattr (1M)
B. displaypkg (1M)
C. diskcfg (1M)
D. dodisk (1M)
Answer: A
SCO answers real questions 090-077 090-077
NO.11 How many detected hard disks can you create partitions and filesystems on during the installation of
the UnixWare 7 operating system?
A. Eight (8)
B. Six (6)
C. Four (4)
D. Two (2)
Answer: D
SCO 090-077 090-077 090-077
NO.12 Which of the following can you NOT use the Boot Command Processor (BCP) to accomplish?
A. Display or change default boot parameters
B. Enter single-user state
C. Load another UNIX kernel
D. Start the print service
Answer: D
SCO demo 090-077 exam 090-077 090-077 test answers
NO.13 How many hard disk slices are created by default?
A. 16
B. 32
C. 64
D. 128
Answer: A
SCO test questions 090-077 090-077
NO.14 Which command do you use to create a set of emergency floppy diskettes?
A. diskadd (1M)
B. disksetup (1M)
C. emergency_disk (1M)
D. emergency_rec (1M)
Answer: C
SCO 090-077 090-077 exam 090-077 test questions
NO.15 Which command can you use to check the accuracy of installed files and compare them to the
contents of the /var/sadm/install/contents file?
A. pkgadd (1M)
B. pkgchk (1M)
C. pkginfo (1M)
D. pkgtrans (1M)
Answer: B
SCO 090-077 090-077 090-077 demo
NO.16 Which two serial device files support software flow control?
A. /dev/term/00m and /dev/term/00h
B. /dev/term/00m and /dev/term/00s
C. /dev/term/00m and /dev/term/00t
D. /dev/term/00s and /dev/term/00t
Answer: D
SCO study guide 090-077 pdf 090-077 090-077 exam
NO.17 Which three port monitors are provided on UnixWare 7 systems?
A. init (1M), liload (1M), and ttyadm (1M)
B. init (1M), liload (1M), and ttymap (1M)
C. init (1M), llistat (1M), and ttyadm (1M)
D. inetd (1Mtcp), listen (1M), and ttymon (1M)
Answer: D
SCO 090-077 questions 090-077 test questions 090-077 dumps 090-077 study guide
NO.18 When running the fdisk (1M) command and selecting se whole disk for UNIX, which statement is true?
A. Any existing partitions are destroyed and the UNIX partition is marked active.
B. Any existing partitions are destroyed and you must manually activate the partition.
C. Any existing partitions are NOT destroyed and the UNIX partition is marked active.
D. Any existing partitions are NOT destroyed and you must manually activate the partition.
Answer: A
SCO study guide 090-077 090-077
NO.19 Which serial communications ports does UnixWare 7 recognize by default ?
A. COM 1 only
B. COM 2 only
C. COM1 and COM2
D. COM1, COM2, COM3, and COM4
Answer: D
SCO 090-077 dumps 090-077 test answers 090-077
NO.20 Which file controls the re-use of a user ID?
A. /etc/skel/ageduid
B. /etc/default/idage
C. /etc/security/ia/ageduid
D. There is not a file that controls the re-use of a user ID. After a user is deleted it is not possible to re-use
an ID.
Answer: C
SCO exam dumps 090-077 test answers 090-077
Pass4Test offer the latest 600-199 exam material and high-quality 74-325 pdf questions & answers. Our JN0-696 VCE testing engine and HP2-Z25 study guide can help you pass the real exam. High-quality JN0-360 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.pass4test.com/090-077.html
没有评论:
发表评论